{"id":1514752966718,"title":"Robobrew V3 All Grain Brewing System With Pump - 35L\/9.25G","handle":"robobrewv3allgrainbrewingsystemwithpump-35l925g","description":"\u003cp\u003eThe Robobrew is an all-in-one electric brewery that has built in elements for heating and boiling, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built in spigot for transfering. It is extremely portable and uses 110v power so it can be used nearly anywhere. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe built in magnetic drive pump easily recirculates the wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the same tubing to transfer your wort to your fermenter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe digital control panel makes it easy to see the current temperature and set the temperature you want. You can also set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or get up in the morning. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it from the RoboBrew and tabs at the base so you can set the malt pipe over the RoboBrew to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe included Robobrew stainless steel wort chiller is shipped with bare ends so you can set it up for your situation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e    Stainless steel construction\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    9 gallon total capacity with a finished beer output of 5-6 gallons\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Digital temperature controller\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    110v power and plug\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Dual heating elements for total control (1000 watts and 500 watts)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Stainless steel 1\/2 inch ball valve for draining (dont have to use the pump)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Immersion wort chiller included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Stainless steel malt pipe\/basket\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Stamped in volume markers\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Glass lid\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Magnetic drive pump for recirculation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Recirculation arm\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    32.75 in H (with recirculation arm) x 12.5 in D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Recommended max. grain bill - 18 lbs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Recommended min. grain bill - 8 lbs\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou might also want:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2' of 1\/2\" ID Silicone tubing for sparging and draining.\u003c\/p\u003e\n\u003cp\u003eTo connect included chiller: 20' of 1\/2\" ID tubing, 3 small hose clamps and 1 brass Garden Hose Thread by 1\/2\" barb adaptor. \u003c\/p\u003e","published_at":"2018-11-07T12:45:36-05:00","created_at":"2018-11-07T12:45:37-05:00","vendor":"Robobrew","type":"All Grain Brewing Equipment","tags":[],"price":47999,"price_min":47999,"price_max":47999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13571808723006,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"30529","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Robobrew V3 All Grain Brewing System With Pump - 35L\/9.25G","public_title":null,"options":["Default Title"],"price":47999,"weight":0,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0771\/1997\/products\/e34dca4d0ed9572ef583fb9b7ff10e289593c98c.png?v=1541612737"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1997\/products\/e34dca4d0ed9572ef583fb9b7ff10e289593c98c.png?v=1541612737","options":["Title"],"content":"\u003cp\u003eThe Robobrew is an all-in-one electric brewery that has built in elements for heating and boiling, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built in spigot for transfering. It is extremely portable and uses 110v power so it can be used nearly anywhere. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe built in magnetic drive pump easily recirculates the wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the same tubing to transfer your wort to your fermenter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe digital control panel makes it easy to see the current temperature and set the temperature you want. You can also set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or get up in the morning. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it from the RoboBrew and tabs at the base so you can set the malt pipe over the RoboBrew to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe included Robobrew stainless steel wort chiller is shipped with bare ends so you can set it up for your situation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e    Stainless steel construction\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    9 gallon total capacity with a finished beer output of 5-6 gallons\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Digital temperature controller\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    110v power and plug\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Dual heating elements for total control (1000 watts and 500 watts)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Stainless steel 1\/2 inch ball valve for draining (dont have to use the pump)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Immersion wort chiller included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Stainless steel malt pipe\/basket\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Stamped in volume markers\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Glass lid\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Magnetic drive pump for recirculation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Recirculation arm\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    32.75 in H (with recirculation arm) x 12.5 in D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Recommended max. grain bill - 18 lbs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e    Recommended min. grain bill - 8 lbs\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou might also want:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2' of 1\/2\" ID Silicone tubing for sparging and draining.\u003c\/p\u003e\n\u003cp\u003eTo connect included chiller: 20' of 1\/2\" ID tubing, 3 small hose clamps and 1 brass Garden Hose Thread by 1\/2\" barb adaptor. \u003c\/p\u003e"}

Robobrew V3 All Grain Brewing System With Pump - 35L/9.25G

Product Description

The Robobrew is an all-in-one electric brewery that has built in elements for heating and boiling, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built in spigot for transfering. It is extremely portable and uses 110v power so it can be used nearly anywhere. 

 

The built in magnetic drive pump easily recirculates the wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the same tubing to transfer your wort to your fermenter.

 

Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.

 

The digital control panel makes it easy to see the current temperature and set the temperature you want. You can also set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or get up in the morning. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!

 

The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it from the RoboBrew and tabs at the base so you can set the malt pipe over the RoboBrew to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.

 

The included Robobrew stainless steel wort chiller is shipped with bare ends so you can set it up for your situation.

Features:

  •     Stainless steel construction
  •     9 gallon total capacity with a finished beer output of 5-6 gallons
  •     Digital temperature controller
  •     110v power and plug
  •     Dual heating elements for total control (1000 watts and 500 watts)
  •     Stainless steel 1/2 inch ball valve for draining (dont have to use the pump)
  •     Immersion wort chiller included
  •     Stainless steel malt pipe/basket
  •     Stamped in volume markers
  •     Glass lid
  •     Magnetic drive pump for recirculation
  •     Recirculation arm
  •     Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)
  •     32.75 in H (with recirculation arm) x 12.5 in D
  •     Recommended max. grain bill - 18 lbs
  •     Recommended min. grain bill - 8 lbs

 

You might also want:

2' of 1/2" ID Silicone tubing for sparging and draining.

To connect included chiller: 20' of 1/2" ID tubing, 3 small hose clamps and 1 brass Garden Hose Thread by 1/2" barb adaptor. 

$ 479.99
Maximum quantity available reached.